A reaction kettle is a type of reaction equipment that must be carefully operated, otherwise it may be damaged due to many reasons and production may be forced to stop. The operation of the reaction kettle requires attention to many aspects.

Firstly, it is necessary to strictly follow the rules and regulations to operate the reactor.

Secondly, before operation, carefully check for any abnormalities. During normal operation, do not open the upper cover or touch the wiring terminals on the board to avoid electric shock; It is strictly prohibited to operate under pressure; During the pressure test with nitrogen, carefully observe the changes in the pressure gauge to reach the test pressure, and immediately close the nitrogen valve switch; The heating speed should not be too fast, and the pressurization should also be carried out slowly, especially the stirring speed, which is only allowed to increase slowly.

Once again, when the kettle body is heated to a higher temperature, do not come into contact with the kettle body to avoid burns; After the experiment, it should be cooled down first. Do not cool quickly to prevent damage caused by excessive temperature difference and pressure. At the same time, timely unplug the power supply.

At the same time, pay attention to the maintenance of the reaction kettle after use, so that the Autoclave can have a better service life.

The above is what Changshu New Century Chemical Equipment Co., Ltd. summarized for you to pay attention to when operating the reactor. If there is any related knowledge you don't understand, you can consult us